Sandia Sniper 80-2200-H Extractor – 200 PSI, 2000W Heater, Dual 2-Stage

Sandia Sniper 80-2200-H: 200 PSI Pump, 2000W Heater, Dual 2-Stage Motors

The Sandia Sniper 80-2200-H adds a 2000W in-line heater to the 80-2200’s 200 PSI pump and dual 2-stage motor configuration. Solution reaches 200°F at delivery, improving stain emulsification on embedded organic soils, grease residues, and odor-causing bacteria in commercial carpet. At 122 lbs with a single 25-ft cord, the 80-2200-H is lighter than the dual-cord 3-stage models while still providing heated extraction capability.

80-2200-H Heater, Pump, and Motor Configuration

• 2000W in-line heater raises solution to 200°F — heats in transit to spray jets, not just at the tank
• 200 PSI solution pump for commercial carpet extraction
• Dual 2-stage Ametek motors for strong simultaneous water lift
• One 25-ft, 12/3-gauge safety power cord; 115V, NEMA 5-15P
• 12-gallon solution and 12-gallon recovery tanks — roto-molded polyethylene
• Cooling intake system prevents motor overheating during extended heated extraction
• Waist-height recessed controls; 10″ non-marking wheels; 27″ L × 20″ W × 38″ H

80-2200-H Applications and Environments

The 80-2200-H fits healthcare facilities, corporate offices, retail stores, schools, and hotels that require heated carpet extraction in a single-cord configuration. The 200°F delivery temperature improves sanitization and stain removal over ambient solution extraction, addressing allergens and odor-causing bacteria that cold extraction mechanical action alone does not fully eliminate. The single 25-ft cord simplifies setup compared to the dual-cord 3-stage heated models (80-3200-H), making the 80-2200-H practical for facilities where locating two separate circuits on the same floor is inconvenient. Made in the USA.

PSI, Water Lift, and What’s Included

Ships with 200 PSI pump, 2000W in-line heater, dual 2-stage Ametek motors, 12-gallon tanks, and one 25-ft, 12/3-gauge cord. Made in America. 115V operation.