Namco FloorWash FB45 Battery Floor Cleaner – 17-Inch Path, 580W, 8,070 sq ft/hr

Namco FloorWash FB45 Battery Floor Cleaner – 17-Inch Path, 700 RPM, 1-Hour Runtime

The Namco FloorWash FB45 is a battery-powered hard floor cleaner with a 17-inch cleaning path, 580W motor running at 700 RPM, and a 1-hour runtime on a full charge. The 1-hour charge cycle returns the machine to full runtime quickly for back-to-back shift use. At 8,070 square feet per hour, the FB45 covers mid-size commercial areas in a single charge without cord management.

FB45 Cleaning Path, Motor Speed, and Battery Performance

• Cleaning path: 17 inch — fits standard commercial corridor widths and navigates around fixtures in retail and office environments.
• Motor: 580W at 700 RPM — high brush speed for scrubbing, polishing, and light stripping on sealed hard floors.
• Runtime: 1 hour per charge — covers approximately 8,070 square feet per charge at rated speed.
• Charge time: 1 hour — equal charge-to-runtime ratio; operators charge between shifts and return to full runtime.
• Coverage: 8,070 sq ft/hr — sufficient for medium commercial floor areas in a standard cleaning shift.
• Recovery tank: 0.8 gallon — collects dirty water from the cleaning pass for disposal.
• Solution tank: 1 gallon — 20% more capacity than recovery; distributes cleaner across the full coverage area.
• Noise: 69 dB — acceptable for daytime cleaning in most commercial facilities.

Hard Floor Cleaning Applications for the FloorWash FB45

The FB45 targets sealed hard floors in retail stores, schools, and light commercial facilities that need a cordless daily cleaning machine smaller than a walk-behind auto scrubber. At 17 inches wide, it cleans aisles, corridors, and open floor areas without the cord management required by corded alternatives. The 700 RPM brush speed is aggressive enough for scrubbing daily soil buildup from VCT and tile, and the combined scrub-and-vacuum operation removes dirty solution in a single pass without a separate mop-up step.

Charge Time and Shift Planning

The FB45’s 1-hour charge time equals its runtime—a 1:1 charge-to-use ratio. An operator can run a full charge during the first cleaning shift, charge the machine in 1 hour during a break or transition, and run a second full cleaning cycle in the same day without a spare battery. For facilities with high-frequency daily cleaning (multiple passes per day), a second battery pack eliminates the charge wait entirely and allows continuous operation across the full shift.