Ebac CD200 Industrial Dehumidifier – 138 PPD, 664 CFM, 220V

Ebac CD200 Industrial Dehumidifier – 138 PPD, Twin-Speed, 220V

The Ebac CD200 is a high-capacity industrial dehumidifier rated at 138 pints per day with twin-speed airflow of 585 or 664 CFM. It runs on 220V single-phase power at 10.6A and 2250W, uses R407C refrigerant, and operates from 33°F to 95°F. At 176 lbs with an epoxy-coated steel cabinet, it is built for long-term installation in demanding environments that require consistent large-volume moisture control.

High-Capacity Moisture Removal

• Capacity: 138 PPD — measured at 80°F/60% RH; covers an effective volume of 21,188 cu.ft.
• Twin-speed fan: 585 / 664 CFM — low speed for quieter operation, high speed for maximum air turnover.
• Refrigerant: R407C — modern refrigerant with lower GWP than R22, standard HVAC serviceability.
• Operating range: 33°F–95°F — hot gas defrost prevents coil lockup at low ambient temperatures.
• Noise level: 73 dBA — suitable for mechanical rooms, warehouses, and plant floors.
• Weight: 176 lbs — epoxy-coated steel cabinet with casters for site repositioning.

Industrial and Commercial Applications

The CD200 is sized for spaces where the K100 series is insufficient. Covered applications include large-format cold storage rooms, shipyard workshops, power plant switching halls, indoor aquatic centers, and pharmaceutical production floors. The twin-speed fan allows operators to reduce noise and energy draw during off-peak hours while maintaining humidity setpoints. The hot gas defrost system handles ambient temperatures at or near freezing without heater strip additions that increase power draw and maintenance burden.

Electrical and Installation Requirements

The CD200 requires a dedicated 220V single-phase circuit at 10.6A continuous draw — a 15A circuit provides sufficient headroom. Power consumption is 2250W. The unit includes an adjustable digital humidistat, status indicators, and an optional remote humidistat for control from outside the monitored space. The built-in condensate pump handles continuous drainage without gravity drain access. Dimensions and weight require forklift or pallet jack placement for initial positioning; the casters allow fine adjustment once in the vicinity of the installation point.

Specifications

Documents

Brochure

Manual