Manual Hard Drive and Media Destroyer PDS-30

Manual hard Drive and Media Destroyer

The PDS-30 is designed for the destruction of hard drives of all types, from laptop
(2.5 format) and standard 3.5 format hard drives from 0.65″ to 1.65″ thick, magnetic
tapes (DLT, LTO, etc.), cell phones, printed circuit boards and other electronic
media by means of a press capable of creating up to 3 tons (6,000 lbs.) of force.

SPECIFICATIONS

Cycle Time: Approximately 5 seconds

Destruction Method:  Uses up to 3 tons (6,000 lbs.) of force and a hardened conical tooling point to punch, break, and mangle hard drives and other media.

DIMENSIONS

Body with handle removed: 21.25″H x 8″W x 17.75″D
Short handle fully extended & set at ~45º: 30″H x 8″W x 27.25″D
Long handle fully extended & set at ~45º: 40″H x 8″W x 36″D
Weight: 106 lbs (48.08kg)

Purchase includes: (1) PDS-30 Destroyer, (1) conical tip (installed), (1) short bar with caps, (1) long bar with caps, (1) pair of safety glasses, (1) hex L-key, (1) user manual

Safety: The PDS-30 Media Destroyer should NEVER be operated by children or
others incapable of understanding its use and basic safety precautions. Because this is an open destruction device it is highly recommended the operator wear eye protection to protect from possible flying debris. A pair of safety glasses is INCLUDED with your PDS-30 purchase.

• Options:
  • SSD Kit: includes chisel tip & SSD crush plate for the destruction of SSDs & other
    flash media
  • Tabletop Stand: includes stand structure, hardware & instructions for assembly
  • Floor Stand: includes stand, hardware & manual instructions

Warranty: 12 month factory warranty against defects in parts and 90 days labor
from shipment date

Made in the USA