NaceCare 114774 36″ Battery Walk-Behind Sweeper – 210 Min, 16-Gal, Traction Drive

NaceCare 114774 36-Inch Battery Walk-Behind Sweeper – 210-Minute Runtime, Traction Drive

The NaceCare 114774 is a 36-inch battery-powered traction-drive walk-behind sweeper with dual side brooms, a 20-inch main broom, a 16-gallon hopper, and 210 minutes of runtime per charge. The integrated vacuum and dust filtration system captures fine dust alongside coarse debris — unlike manual sweepers where fine particles remain airborne or on the floor after broom contact. Traction drive propels the machine forward, eliminating the push effort needed on manual sweepers across large floor areas.

NaceCare 114774 Sweeping Specs, Runtime, and Dust Control System

• 36″ total sweeping width (20″ main broom + dual side brooms): side brooms pull debris from wall edges and floor joints into the 20″ main broom’s path, capturing material that a center-only sweeper would require a second wall-edge pass to collect.
• 210-minute (3.5-hour) runtime: covers extensive sweeping runs before recharging; recharge time is 9 hours, making an overnight charge practical for facilities with single-shift cleaning schedules.
• 16-gallon hopper capacity: higher capacity than compact push sweepers (5–10 gal), reducing the number of stops needed to empty during large-area sweeping runs in warehouses and manufacturing facilities.
• Traction drive: self-propels the sweeper forward, removing the push effort needed across large floor areas; important on facilities where operators sweep thousands of square feet per shift.
• Vacuum-assisted dust filtration system: captures fine dust particles that brush sweeping alone would redistribute; maintains air quality standards in facilities with indoor air quality requirements.

Indoor and Outdoor Applications for the 114774 Battery Sweeper

The 114774’s battery operation eliminates fumes that restrict gas-powered sweeper use in indoor facilities. In warehouses and distribution centers, the 210-minute runtime covers extended sweeping runs across large aisle networks without returning to a charging station. Manufacturing facilities use battery sweepers to clear production debris during shift changes without gas exhaust building up near workstations. Outdoor parking lots and covered loading dock areas benefit from the battery operation — no exhaust, no extension cord required. The 16-gallon hopper handles the coarse debris volumes typical of warehouse and manufacturing environments without constant stops to empty.

Related: Commercial Sweepers · Walk-Behind Floor Sweepers · Floor Cleaning Equipment

NaceCare 114774 Battery System and Maintenance

The 9-hour charge cycle from full depletion fits an overnight charge schedule for facilities with single-shift daytime sweeping operations. Broom replacement — main broom and side brooms — is the primary consumable maintenance task, manageable by facility staff without service technicians. The vacuum filter requires periodic cleaning to maintain dust capture efficiency; compressed air or tap water rinse removes accumulated fine dust from the filter media.

Documents

Spec Sheet

Manual