Sandia 80-0016 500 PSI Pump for 6 and 12-Gallon Extractors – OEM

Sandia 80-0016 — 500 PSI Replacement Pump for Sniper 6 and 12-Gallon Carpet Extractors

The Sandia 80-0016 is the factory 500 PSI pump used in Sandia Sniper 6-gallon and 12-gallon carpet extractors — and the OEM replacement when that pump fails. At 500 PSI, the Sniper operates at the high end of portable carpet extractor pressure, suitable for deeply embedded soil in commercial carpet and upholstery applications where lower-pressure machines leave residue. When pump pressure drops or the unit stops delivering solution, this replacement restores the machine to original factory specification.

80-0016 Pressure Rating, Sniper Compatibility, and Pump Differentiation

The 500 PSI pump is the highest-pressure option in the Sandia Sniper pump family. At 500 PSI, the Sniper outperforms portables with 100–300 PSI pumps for cleaning heavily soiled commercial carpet, extraction of embedded allergens, and upholstery treatment in hospitality environments. This pump requires compatible 500-PSI-rated hoses and wands — do not pair with components rated only for lower-pressure operation.

• 500 PSI output — highest-pressure pump in the Sniper line; required for operators who chose the Sniper specifically for high-pressure extraction capability
• 6 and 12-gallon Sniper compatible — factory replacement for both tank sizes equipped with the 80-0016 pump from the factory
• OEM Sandia assembly — manufactured to the same specifications as the original pump; restores rated PSI at the wand
• Check rebuild kits first — if the pump body is intact but showing valve wear or bearing noise, Kit B (80-0016-RB, valve/seals) or Kit C (bearing) may restore performance for less than a full pump replacement

80-0016 Applications and Environments

Commercial carpet cleaning companies that selected the 500 PSI Sniper for hotel deep cleaning, property restoration carpet extraction, and high-soil commercial accounts need 500 PSI restored after pump failure — stepping down to a lower PSI pump defeats the machine’s original capability. Property managers and facility service teams with in-house carpet maintenance programs will extend the Sniper’s operational life by replacing the pump rather than purchasing a new machine.

80-0016 Pump Fit and Rebuild vs. Replace Decision

Ships as the complete 80-0016 pump assembly. Before ordering the full pump, check whether the pump body shows damage or if the failure is limited to valves/seals or bearing — in that case, the 80-0016-RB rebuild kit is the appropriate lower-cost fix. Confirm pump part number on your machine matches 80-0016 before ordering.

Specifications