Sandia Sniper 86-3100-H Extractor – 100 PSI, 2000W Heater, 6-Gallon, Dual 3-Stage

Sandia Sniper 86-3100-H: 100 PSI Pump, 2000W Heater, Dual 3-Stage Motors, 6-Gallon

The Sandia Sniper 86-3100-H adds a 2000W in-line heater to the 86-3100’s dual 3-stage motor and 100 PSI pump configuration. Solution reaches 200°F at delivery, providing the same thermal cleaning capability as the 12-gallon 80-3100-H in a 6-gallon unit that is lighter and more maneuverable for room-by-room work. At 87 lbs versus 82 lbs for the non-heated 86-3100, the heater adds minimal weight while substantially expanding the unit’s stain and sanitization performance.

86-3100-H Heater, Motor, and Tank Specs

• 2000W in-line heater: solution reaches 200°F at the spray point during extraction
• 100 PSI solution pump for commercial carpet fiber penetration
• Dual 3-stage Ametek motors: 205″ water lift
• Two 25-ft, 12/3-gauge safety power cords; 115V, NEMA 5-15P
• 6-gallon solution and 6-gallon recovery tanks — roto-molded polyethylene
• Cooling intake system prevents motor overheating during extended heated runs
• 10″ non-marking wheels; 26″ L × 17″ W × 35″ H

86-3100-H Applications and Environments

The 86-3100-H fits hotel housekeeping teams, healthcare environmental services crews, and commercial cleaning contractors who need heated extraction in a unit small enough to transport efficiently between individual rooms. The 87-lb weight and 26″ × 17″ footprint allow single-operator transport in elevators and through standard doorways. The 200°F delivery temperature addresses odor-causing bacteria and embedded organic soils more effectively than cold extraction, making the 86-3100-H appropriate for post-occupancy room turnovers in hospitality and healthcare where infection control is a priority alongside cosmetic cleanliness. The 6-gallon tanks require more frequent fill/dump cycles than 12-gallon models — operators cleaning multiple rooms in sequence should plan refill stops between rooms.

PSI, Water Lift, and What’s Included

Ships with 100 PSI pump, 2000W in-line heater, dual 3-stage Ametek motors (205″ water lift), 6-gallon tanks, and two 25-ft cords. 115V operation.