XPOWER X-3580 HEPA Air Scrubber – 600 CFM, 4-Stage Carbon+HEPA, 5-Speed, ETL/CETL

XPOWER X-3580 Professional HEPA Air Scrubber – 600 CFM, 4-Stage Filtration

The XPOWER X-3580 is a 600 CFM, 4-stage HEPA air scrubber drawing 2.8A at 115V with a 1/2 HP high-torque motor and 5-speed control from 950–2,400 RPM. Its 4-stage filtration uses a different filter set than the X-3780: outer ring washable mesh (NFR12), washable nylon mesh (NFS16), activated carbon (CF35, 1.4″ thick), and HEPA35 (1.4″ thick HEPA, 99.97% @ 0.3 µm). ETL/CETL certified, filter change indicator light, stackable ABS housing, 32.8 lbs. Physically compact at 19.6″ × 12.3″ × 21.6″.

X-3580 – Key Specifications and Features

• Airflow: 600 CFM, 5-speed control (950–2,400 RPM)
• Motor: 1/2 HP high-torque induction
• Electrical: 115V, 60 Hz, 2.8A
• Filtration: 4-stage — NFR12 outer ring mesh, NFS16 inner mesh, CF35 1.4″ carbon, HEPA35 1.4″ HEPA (99.97% @ 0.3 µm)
• Filter change indicator: light signals HEPA replacement needed
• Housing: injection-molded ABS, stackable
• Cord: 13 ft, 18 AWG
• Duct: 6″ × 11.9″
• Certifications: ETL/CETL
• Xactimate code: AQRS
• Dimensions: 19.6″ × 12.3″ × 21.6″
• Weight: 32.8 lbs

Where the X-3580 Performs

Grooming salons and pet care facilities specify the X-3580 for continuous animal dander, hair, and odor filtration in small-to-medium-sized spaces — the carbon stage handles pet odors while the HEPA stage manages dander and fine particulates. Medical and dental offices use it for background air quality management in treatment rooms where HEPA filtration and odor adsorption run simultaneously throughout operating hours. The 5-speed control’s lowest setting (950 RPM) operates quietly enough for chairside use. At 2.8A, multiple units run per circuit; the compact ABS housing fits in tight corners without impeding foot traffic in active clinical spaces.

Related: Air Scrubbers · XPOWER Equipment · Mold Remediation Equipment

X-3580 vs. X-3780 – Two 4-Stage Units at the Same CFM

The X-3580 and X-3780 deliver identical 600 CFM at 2.8A with 4-stage filtration including carbon. The difference is filter dimensions: the X-3780 uses a flat 16″ × 16″ HEPA50 (2″ thick) and CF35 carbon, while the X-3580 uses 1.4″ HEPA35 and CF35 with an additional outer NFR12 ring mesh at the inlet. The X-3580’s thinner filters may offer lower replacement cost at the expense of per-filter dust-holding capacity. Both carry the same AQRS Xactimate code and ETL/CETL certification.

Documents

Manual