Challenger Lifts CL10AV3-QC Versymmetric Adjustable Two Post Lift

Challenger Lifts CL10AV3-QC Versymmetric Adjustable Two Post Lift
10,000 lbs. Capacity DirectSPOT 3-Stage Front & 3-Stage Rear Arms
3 Adjustable Widths and 2 Adjustable Heights with QuickCycle

The Challenger Lifts CL10AV3-QC Versymmetric Adjustable Two Post Lift is designed with versatility and convenience in mind, offering three adjustable widths and two adjustable heights to suit the unique needs of your garage or shop. QuickCycle technology allows the lift to rise in only 27 seconds and lower in only 17 seconds. Featuring Versymmetic Technology, these innovative lifts allow you to service the broadest range of vehicles, significantly enhancing your shop’s capability and, most importantly, your bottom line. With it’s 3-stage front and rear arms equipped with the pioneering directSPOT design, the days of shuffling a vehicle back and forth to position the front arms properly are over. Now, you can achieve accurate first-try spotting every time, reducing frustration in your shop and skyrocketing your productivity. Challenger Lifts CL10AV3-QC is ALI and ETL Certified.

In today’s fast-paced automotive service industry, efficiency and versatility are paramount. That’s where our CL10AV3 model, featuring our exclusive Versymmetric technology, truly shines. This innovative technology allows you to service the broadest range of vehicles, significantly enhancing your shop’s capability and, most importantly, your bottom line. With its 3-stage front and rear arms equipped with the pioneering directSPOT design, the days of shuffling a vehicle back and forth to position the front arm properly are over. Now, you can achieve accurate first-try spotting every time, skyrocketing your productivity.

The CL10AV3 comes in various configurations tailored to meet your specific service needs. For shops prioritizing speed, our drive-on pad option ensures the quickest vehicle spotting, ideal for express service lanes. Meanwhile, our QuickCycle upgrade redefines efficiency, boasting an astonishing lift speed – rising in just 27 seconds and descending in 17 seconds. This impressive speed propels your service capabilities to new heights and allows your team to handle more vehicles, enhancing customer satisfaction and your shop’s reputation.

Understanding that one size does not fit all, we’ve made adjustable height and width options, ensuring the CL10AV3 can adapt to your shop’s unique requirements. Furthermore, a wide selection of accessories means that no matter what challenges you face, the CL10AV3 is equipped to tackle them, making it the definitive choice for any forward-thinking shop.

Choose the CL10AV3 and expand your service potential with our most versatile, easy-to-operate lift. Proudly ALI Certified, it’s not just an investment in equipment but an investment in your shop’s future, promising reliability, safety, and unmatched performance.

CL10AV3 Series comes standard with offset 3-stage front arms allowing them to be stowed in an asymmetric lifting position, rear of the front tires. Unlike many competitor lifts, when the vehicle is driven through, the front arms are capable of directSPOT to the vehicle’s lifting point without having to reposition the vehicle or shuffle back and forth to reach its recommended lift points.

CL10AV3 Series 2 post hydraulic auto lifts provide automotive service shops with the right equipment to service the most vehicles on the road in one single auto lift service bay. It’s Versymmetric two lifts in one design makes it both a car lift (asymmetric lifting) and a truck lift (symmetric lifting). What’s this really mean? Shops do not get caught in a situation where they cannot safely and properly lift a certain vehicle that comes in for service.

• Three Adjustable Widths: The CL10AV3 allows purchasers to customize the width to fit their specific workspace, providing optimal flexibility
• Enhanced Technician Workspace: The adjustable widths give technicians more room to work, improving efficiency and comfort
• Flexible Installation Options: With its adjustable design, the CL10AV3 can be installed in various shop configurations, accommodating different spatial constraints
• Industry First Two Post Auto Lift with Versymmetric Plus Offset 3-Stage Front Arms + 3-Stage Rear Arms
• Maximum Arm Sweep, reach and retraction meets the widest range of recommended lifting points
• Offset Front Arms provides single sweep spotting – no rolling vehicles back and forth to swing front arm clear of front tire.

Other standard features include double telescoping screw pads, heavy-duty pulley and cable equalization system, 48″ elongated carriage, rubber door guards, adjustable arm restraint shafts, single point mechanical lock release, and padded overhead shut off.

New Power Unit Service Bulletin Effective 4/21/25

As of 4/21/25, Challenger Lifts will be switching to the Bucher AB-9367-DLH and AB-9858-DLH power units from the current SPX AB-9367 and AB-9858 models. These new Bucher power units will only require a 20 amp breaker. Electrical consumption is becoming more important as customers look to save on electrical installation costs (less breakers) and conserve energy.

Benefits Of The Change:

• Minimum Breaker Required Reduced from 30 to 20 Amp
• Optimize Power Consumption
• By consolidating our 10K and 12K power units, we simplify maintenance procedures and reduce inventory complexity

New CYL+ Descent Time Service Bulletin Effective 2/18/26

As of 2/18/26, Challenger Lifts will be updating the cylinders that we currently are using to improve the descent times of our CL10 and CL12 Series 2-Post lifts and also the EW and EV 10K and 12K Series lifts.

We have improved the lowering speed by adding a pressure compensating flow control valve to each hydraulic cylinder. These flow control valves maintain the lowering speed to a constant 20 (approximately) seconds regardless of the weight of the vehicle.

Descent time of all models will improve, increasing productivity!

This change will not affect the QuickCycle™ model. You will still need to order QuickCycle™ if you want the faster rise and descent.

All new products will be marked with the label CYL+ on the outside of the packaging. This will call out that it has the new style cylinders with the faster descent.

Benefits Of The Change:

• Facilitates the technician’s ability to lower their completed work faster and get on to the next job
• Improved lowering speed will improve the productivity of the shop

Power Units Service Bulletin Effective 3/31/26

Due to ongoing supply chain challenges affecting our current power unit manufacturer, starting March 29th, 2026 we will be utilizing power units from both of our approved manufacturers for the foreseeable future. This adjustment will allow us to continue shipping product without interruption and maintain the level of service you expect from us. We apologize for this inconvenience and appreciate your understanding as we work through these temporary constraints.

Both current manufacturers meet all ALI certification requirements and fully align with our performance and quality standards. As a result:

• Either manufacturer’s power unit may be included with any two post or inground lift that ships.
• The power units will carry the warranty that the lift carry, regardless of manufacturer.

CL10AV3, CL10AV3-2, CL10AV3-3, CL10AV3-EV, CL10AV3-2-EV, CL10AV3-3-EV, CL10A-XP9, CL10A-2-XP9, CL10A-3-XP9
CL12A, CL12A-1, CL12A-2,CL12A-EV, CL12A-1-EV, CL12A-2-EV, CL12A-LC, CL12A-LC-EV
EV1020, EV1020-XP9, EW10, EH10, EV1220, EW12

*All Update and Completion Kits for these models will also be affected

As we move past the current supply chain issues, our long term plan is to return to using the Hydraulic Solutions power unit on our domestically produced models and the Bucher power units on our imported models. We believe this approach provides the most stability moving forward given the ongoing turbulence in the supply chain.

Please also note that once we transition back to our standard configuration, you will need to mark your orders with the amperage 20amp or 30amp) you prefer for your 10K two post and inground lift orders. If you do not mark your orders, you will automatically receive the 30amp Hydraulic Solutions power unit.

Thank you for your continued partnership and patience. If you have any questions or need additional information, our team is ready to assist.